Make sure that your robotic mower has the latest software version

Move your SØMLØS G1 in the middle of your lawn after everything is set up properly and make sure the Red/Blue light is still flashing.

Do the "SELF-TEST"

Go to Home Screen -> Diagnostics -> Choose “Check Signal”. Check Sensor indicator.

LCD Screen should display the following:
L Sensor: Inner
R sensor: Inner
Lift Sensor: OK
Bump Sensor: OK
Rain Sensor: OK

Do a Factory Reset:
Go to Home screen > System settings > Factory reset
Press “OK”
Enter your password
Select “YES”
Your SØMLØS G1/G1s is now resetting back to factory settings.

1. Check if your it's set to Auto - your SØMLØS will back to the charging dock in a counter-clockwise motion.
2. Please make sure that the cables at the back of your charging station is correctly placed (refer to Page 5 of your Norwegian manual).
3. Uninstall the battery for 1 minute, then reinstall it.
4. Carry your lawnmower and place it to it's charging dock. Check if it's charging.

Note if everything has been done correctly and your mower is still not charging, please contact our support team: support@somlos.com

1. When you're lifting your mower, use the handle bracket and not the cover. Otherwise it will result to "bumper error" 
2. Check the inside of your mower's bumper to see if anything is stuck.
3. Do not to press the STOP button, but use both hands to adjust the bumper instead.